Standards of Practice

Residential Standards - Four or Fewer Units

• Originally Adopted September 13, 1983
• Revised November 1, 1996
• Revised April 15, 1999
• Revised July 12, 2003
• Revised April 15, 2006 — Effective July 1, 2006

Note: Italicized words in this document are defined in the Glossary of Terms.

Download the CREIA Residential Standards of Practice (PDF: 110KB)

Table of Contents

I. Definitions and Scope

II. Standards of Practice

1. Foundation, Basement, and Under-floor Areas
2. Exterior
3. Roof Covering

A. Items to be inspected:

1. Covering
2. Drainage
3. Flashings
4. Penetrations
5. Skylights

B. The inspector is not required to:

1. Walk on the roof surface if in the opinion of the Inspector there is risk of damage or a hazard to the Inspector
2. Warrant or certify that roof systems, coverings, or components are free from leakage

4. Attic Areas and Roof Framing
5. Plumbing
6. Electrical
7. Heating and Cooling
8. Fireplaces and Chimneys
9. Building Interior

III. Limitations, Exceptions and Exclusions

IV. Glossary of Terms

Back to top